Assembly technology - for every application

Decades of experience and worldwide know-how

Right from the start, we have focused on optimizing your assembly processes
Activity posed. Over the years, we have developed and built a wide range of assembly tools. Of course, challenges for our special tool construction came and come again and again. In the meantime, however, we have optimized many of our solutions so that we have them standardized in stock today.
At the same time, our tool experts keep an eye on the global tool market - because not every wheel has to be reinvented.
So today we can offer you the optimal tool for every screwdriving process in your assembly processes. Mostly from our own production, but from the globally available range if it makes sense.

Our product range in the field of assembly technology:

  • Hold & Drive for angle tightening tools
  • Hold & Drive overload protection
  • Spindle guides
  • Thread cutter
  • Sockets with and without joint, spring, magnet - for different screw heads and also special shapes
  • Bit holder and bits in all variations
  • Ring magnet sleeves
  • Pressure roller and angle heads

Product groups assembly technology

Hold and Drive

Hold & Drive for angle tightening tools

Our coordinated Hold & Drive unit is mounted on the Hold & Drive angle heads of the standard screw manufacturers. This consists of a counterholder, a changeable bit and a screwdriver socket. The unit is used, among other things, on tie rods, shock absorbers and side window screw connections. The Hold & Drive unit is characterized by reliability.

Hold & Drive overload protection

The adjustable slip clutch allows the torque to be limited to the counter holder (bit). This increases the service life of the bits massively and reduces malfunctions at the assembly station.

Spindle guides

Spindle guides

To avoid the imbalance that occurs when using extreme extensions, we recommend spindle-guided extensions. The unbalance when screwing is prevented by the bearing of the extension. Minimized wear and tighter screw tolerances are possible.

Sockets

Spring loaded sockets

Combi sockets

In order to produce the increasing variety of product variants with less manufacturing effort, we have developed combination sockets that accommodate two different wrench sizes. An otherwise necessary tool change is not necessary. The result is a reduction in production time.

sockets, Torx with magnet

ekatec-Torx socket with magnet holds your screw securely. Good handling and process reliability are guaranteed.

Machine insert with joint without spring

  • With high-strength ball joint (optimized service life)
  • Special designs for your screwing case are possible
  • You can freely select the drive, output, length, spring system and magnet

Machine insert with joint and spring

  • With high-strength ball joint (optimized service life)
  • Special designs for your screwing case are possible
  • You can freely select the drive, output, length, spring system and magnet

Machine insert with joint and hidden spring

  • With high-strength ball joint (optimized service life)
  • Special designs for your screwing case are possible
  • You can freely select the drive, output, length, spring system and magnet.
Bit holder

Bit holder

The standard bit holder with exchangeable bit guarantee long service life at minimal cost. All bit holders are also available in a covertec version that is surface-proof.

 

Bits

Bits very long

We have many lengths and sizes in our range.

Bits with ring magnet

  • Perfect handling and process reliability
  • Holds screws reliably on the screwdriver

If you cannot find anything suitable, please call us. We manufacture bits in the desired design for you.

Pressing roller

Pressing roller

The force-monitored pressure roller secures your adhesive connection; the roller can only be rotated when the pressure is applied sufficiently. The production of scooters up to 170N contact pressure, as well as pressure rollers for special requirements are possible.

Angle head

Angle head 110 degrees

In some screwing cases, the ekatec 110 ° angle head enables access to screwing points that cannot be reached with conventional tools. As an integrated module, our tongue gearheads can be mounted directly on these angle heads.

The optimal assembly tool for your screwdriving application

Put your screwdriving cases in the hands of ekatec tool experts.